Load data for 9 mm Steyr (Roth) + .355 | 75gr | CutEdge HGHP

Recommended Powder(s): Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 75gr \| CutEdge HGHP
Manufacturer SKU:	HGHP 380 75
Bullet Weight:	75gr \| 4.9g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.440" \| 11.2mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.231" \| 31.3mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B8532_C1226
Last updated:	2025-01-01

Load data for 44 loads in caliber 9 mm Steyr (Roth) with .355 | 75gr | CutEdge HGHP bullet and 22 powders such as Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	64%	16984	87%	**32	86%
Accurate Solo 1250	<<locked>>	68%	16853	86%	**55	96%
[Alliant UNIQUE]*	<<locked>>	69%	16795	86%	**91	89%
Baschieri & Pellagri 100	<<locked>>	65%	17434	89%	**32	99%
Hodgdon Universal	<<locked>>	62%	16955	87%	**71	97%
Hodgdon TrailBoss	<<locked>>	94%	9935	51%	**63	98%
Lovex S020	<<locked>>	66%	17492	89%	**94	93%
Maxam CSB 1	<<locked>>	71%	17114	87%	**55	96%
Maxam CSB 2 👍	<<locked>>	71%	16839	86%	**11	100%
Maxam CSB 3	<<locked>>	65%	16810	86%	**45	99%
Maxam CSB 4	<<locked>>	62%	17071	87%	**35	100%
ReloadSwiss RS 14	<<locked>>	95%	9340	48%	**50	93%
ReloadSwiss RS 20	<<locked>>	73%	16665	85%	**17	92%
SNPE Vectan A0	<<locked>>	71%	17390	89%	**52	90%
SNPE Vectan BA 9	<<locked>>	62%	16795	86%	**29	94%
SNPE Vectan BA9 1/2	<<locked>>	65%	17419	89%	**75	96%
[Somchem MP200]*	<<locked>>	64%	17027	87%	**78	88%
Somchem MS200	<<locked>>	66%	17114	87%	**65	91%
Vihtavuori N320	<<locked>>	64%	17550	90%	**75	100%
Vihtavuori N32C Tin Star	<<locked>>	84%	16853	86%	**99	100%
Vihtavuori N330	<<locked>>	68%	17318	88%	**17	98%
Vihtavuori N340	<<locked>>	71%	17564	90%	**94	90%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	62%	15954	81%	**09	85%
Accurate Solo 1250	<<locked>>	61%	13532	69%	**40	93%
[Alliant UNIQUE]*	<<locked>>	62%	13822	71%	**76	85%
Baschieri & Pellagri 100	<<locked>>	61%	15751	80%	**80	98%
Hodgdon Universal	<<locked>>	60%	16273	83%	**52	96%
Hodgdon TrailBoss	<<locked>>	62%	5990	31%	**0	91%
Lovex S020	<<locked>>	61%	14997	77%	**09	90%
Maxam CSB 1	<<locked>>	61%	13126	67%	**20	92%
Maxam CSB 2	<<locked>>	61%	12749	65%	**73	97%
Maxam CSB 3	<<locked>>	61%	15185	78%	**89	98%
Maxam CSB 4	<<locked>>	60%	16128	82%	**09	100%
[ReloadSwiss RS 14]*	<<locked>>	61%	5671	29%	**7	85%
[ReloadSwiss RS 20]*	<<locked>>	61%	11879	61%	**14	84%
[SNPE Vectan A0]*	<<locked>>	60%	13053	67%	**94	84%
SNPE Vectan BA 9	<<locked>>	61%	15983	82%	**99	93%
SNPE Vectan BA9 1/2	<<locked>>	61%	15795	81%	**16	95%
[Somchem MP200]*	<<locked>>	60%	15635	80%	**25	86%
[Somchem MS200]*	<<locked>>	61%	14736	75%	**80	88%
Vihtavuori N320	<<locked>>	62%	16520	84%	**48	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	9790	50%	**60	100%
Vihtavuori N330	<<locked>>	61%	14054	72%	**12	95%
[Vihtavuori N340]*	<<locked>>	62%	13895	71%	**66	86%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.